Find A Dealer

Horizontal TMR - MT-D Series   with silage cutter

Our trailed horizontal mixer with silage cutter has a mixing and chopping system and a cutting unit that have evolved over the years to achieve optimum performance.
Operating basically on a central axis on which two hollow spirals are mounted which move from the ends to the center of the axis. This mixing system ensures product movement both lengthwise and crosswise, while avoiding excessive compression of the ingredients, obtaining a  fluffy and homogenous mix.
The two beaters mounted on the  interior wall of the tub that perform a circular motion, ensure better product flow.
The units consists of a large and effective milling cutter that incorporates a safety system against overpressure and a tailgate for easy loading.
This system ensures greater homogeneity of the mixture,  more regular chopping and reduced mixing time. In turn, the working concept of the machine reduces the risk of breakage due to the absence of mechanical moving parts and traction, as the auger is powered by direct PTO from the tractor.
Other advantages:
*  Long life
*  Simple operation concept
*  Reduced height
*  Low maintenance cost
Standard Equipment:
• Mechanical jack for MT 7, 10 and 13 models.
• Hydraulic jack for MT 16 and 20 models.
• Two flexible controls by cable (beater by manual control)
• Simple viewing ladder
• Programmable weighing system PERIN M-700 (20 rations x 20 ingredients).
• Self-contained, hydraulically independent from the tractor.
• Conveyor 3.05 ft long with two cylinders
• Tires:
       MT 7: 12,5/80-15,3
       MT13: 13,5/75 430
       MT16: 385 /65 R22,5
       MT20: 385 /65 R22,5
Silage Cutter:
• Cutting cylinder 690 mm/2.26 ft diameter, and 1.500 mm/4.92ft length.
• Hydraulic motor.
• Pressure relief regulator, in order to control the downward movement speed.
• Two hydraulic cylinders move up and down the whole system.
• Hydraulic back feet.
• Controls through flexibles in two blocks ( manual control for beaters )
Additional Options:

* Stainless steel  bottom

*  Change belt to opposite side
*  Belt flow control
*  Hydraulic belt elevation
*  Belt extension
*  Chain, floor and crossbar of unloading belt in stainless steel
*  Dual discharge

*  Manual brake
*  Hydraulic brake
*  Manual and hydraulic brake
*  Pneumatic and manual brake

*  Solenoid valve control
*  Radio control (wireless)

Jack :
*  Hydraulic jack with hand pump
*  Mechanical jack​

*  Special chassis with springs

*  Bale Kit
*  Battery Kit
*  Lights Installation
*  Double-entry Inverter for mt 7 10 and 13 (som)
*  750x220 Magnetic plate
*  Mudflaps
*  Axis change  curved  to straight
*  Add beater
*  Spotlight