Vertical TMR Self-proppelled with two augers, side discharge.
TUB CAPACITY/ 14.5 m3/ 512 c.f. | 16 m3/565 c.f. | 17 m3/600 c.f. | 19 m3/671 c.f.
Mixing system with dual heavy duty vertical augers and interchangeable resistant knifes. Driven by a variable flow pump and piston engine. Adjustable mixing speed.
90 hp, adjustable speed motor. Width 2000 mm. Manually driven lowering adjustment in the control panel, lowering cut-out by pressure switch depending on the working pressure of the cutter. Driven by a variable flow pump and orbital motors.
LOADING BELT/ Rubber.
UNLOADING BELTS/ By flat side door with discharge tray.
WEIGHSCALE/ Programmable 20 recipes x 20 Ingredients.
ENGINE/ Diesel, FPT (IVECO), 129 kW, 2200 rpm, front, right.
FUEL TANK/ 160 litres.
Hydrostatic closed circuit. Driven by a variable flow pump and piston motor.
AXLES/ Two, front drive and steering. Four wheels 445/45R19.5
SUSPENSION/ Front and rear leaf springs.
STEERING/ Hydraulic servo. Maximum turning angle of 40°
BRAKES/ Service, parking and emergency on front axle.
HYDRAULIC AND ELECTRICAL/
Circuits designed to work in harsh environmental conditions. Compliant with European machines safety and electromagnetic incompatibility regulations. Located behind the cab.
One-seat. Manufactured in steel with anti-corrosion chemical treatment. Optimal visibility of the environment (inward sloping windshield). Swing door. Safety glass.
Multifunction joystick, buttons and indicators (reducer oil temperature, hydraulic oil temperature, mixer pressure, cutter pressure, hydraulic oil level, breakdown lights ...).
Two spotlights front and two rear, air suspension seat, fire extinguisher, water heating, radio CD.
GROUND SPEED/ Movement speed 0-15 km/h (25 km/h option) 0-9.3 miles/h (15.5 miles/h optional).
|Magnet fixed on unloading belt (125 m3/h, 73.5 c.f./min)
Air conditioning+ climatizer
Electric heater on rearview mirrors
Rearview mirrors electrically adjusted + electric heater
Sliding left rearview mirror
Led technology headlight
Silo cutter support
Silo cutter suspension by nytrogen accumulator
Silo cutter made on stainless steel
Double TV camera TFT colour 7”
Reversible fan 175 CV CLEAN FIX
Reversible fan 238 CV CLEAN FIX
Centralized greasing automatically
No loading conveyor
Sliding conveyor under the tub (200 mm/7.84 inches)
Extra door on flat side
Back straw blower
Differential block (only 4x4)
Increase motor power from 175 to 238 CV IVECO
Hydraulic suspension on front axle
Loading belt made by chain and Polyethilene crossbeams
4 wheels drive (4WD) 4 wheels 445/45-19,5 (ONLY on MVS 17 and 19)
4 stering wheels (4SW) 4 wheels 445/45-19,5 (ONLY on MVS 17 and 19)
4 stering wheels and 4 stering wheels (4WD x 4SD) 4 wheels 445/45-19,5 (ONLY on MVS 17 and 19)
RADIO-CD bluetooth (phone)
2 Hydraulic restrictor knives
4 Hydraulic restrictor knives
Mixing augers made on stainless steel AISI 304
Inner tub covering in stainless steel AISI 304 (1500 mm /59 inches high)
Extreme Temperatures (-20º C/-4°F) starting system, Heating system hydraulic oil and engine.