Horizontal TMR Self-proppelled with one auger ground speed till 16 miles/h

TUB CAPACITY / 13 m3/459 c.f. | 16 m3/565 c.f. | 20 m3/706 c.f. | 25 m3/883 c.f.
MIXER/
Mixing system with a single heavy duty auger and interchangeable resistant knifes. Operated by a variable flow pump and piston engine coupled to the step-down gear at the rear. Adjustable mixing speed
CUTTER/
90 hp, adjustable speed motor. Width 2000 mm/78.74 inches. Electrically driven lowering adjustment in the control panel, lowering cut-out by pressure switch depending on the working pressure of the cutter. Driven by a variable flow pump and orbital motors.
LOADING BELT/ Polyethylene chain and cross pieces
UNLOADING BELTS/ 930 mm/36.61 inches long side belt with hydraulic lift
WEIGHSCALE/ Programmable, 99 recipes x 20 ingredients x 10 discharges, modem output
ENGINE/ Diesel, FPT (IVECO), 129 kW , 2200 rpm or 175 kW @ 2200 rpm depending on model, rear
FUEL TANK/ 160 litres/42.26 Gal.
TRANSMISSION/
Hydrostatic closed circuit. Variable flow pump and two rear wheel gears, powered by two piston motors
AXLES/ One steerable front. Front wheels 305/70R19.5, rear wheels 445/65R22.5
SUSPENSION/ Front springs
STEERING/
Hydraulic servo. Maximum turning angle of 40°
BRAKES/ Service, parking and emergency on rear axle
HYDRAULIC AND ELECTRICAL/
Circuits designed to work in harsh environmental conditions. Compliant with European machines safety and electromagnetic incompatibility regulations. Located on the side cabinet on the tub.
CABIN/
One-seat. Manufactured in steel with anti-corrosion chemical treatment. Optimal visibility of the environment (inward sloping windshield). Swing door. Safety glass.
CONTROL SYSTEM/
Multifunction joystick, buttons and indicators (reducer oil temperature, hydraulic oil temperature, mixer pressure, cutter pressure, hydraulic oil level, breakdown lights ...)
EQUIPMENT/
Two spotlights front and two rear, air suspension seat, fire extinguisher, water heating, radio CD, tool box
GROUND SPEED/ Ground speed 0-15 km/h ( 25 km/h option) 0-9.32 miles/h (15.5 miles/h optional)

 

Magnet fixed on unloading belt (125 m3/h, 73.5 c.f./min)
Air conditioning
Air conditioning+ climatizer
Electric heater on rearview mirrors
Rearview mirrors electrically adjusted + electric heater
Sliding left rearview mirror
Working headlight
Led technology headlight
Sweeper
Silo cutter support
Silo cutter suspension by nytrogen accumulator
500L / 132 Gal. molasses tank. Included pump (installed)
Silo cutter made on stainless steel
Double TV camera TFT colour 7”
Reversible fan 175 CV CLEAN FIX
Reversible fan 238 CV CLEAN FIX
Centralized greasing automatically
Centralized greasing
No loading conveyor
Differential block (only 4x4)
Increase motor power from 175 to 238 CV IVECO (on MTS LINCE-H 13 & 16)
Add extra door with belt 930 mm /36.6 inches length with hydraulic elevation
2nd door opposite side (double unloading) WITHOUT ELEVATOR
Laoding belt made on rubber
Extension of the elevator 0,3 m/11.8 inches (Reaching total length of conveyor 1230 mm/48.42 inches)
Extension of the elevator 0,5 m/19.7 inches (Reaching total length of conveyor 1430 mm/56.3 inches)
Total extended length of the elevator from 1600 mm/63inches to 1800 mm/70.86 inches
Change the chain, bottom and crossbar of the elevator in stainless steel (930 mm/36.6 inches)
Change the chain, bottom and crossbar of the elevator in stainless steel (1230 mm/48.42 inches)
Change the chain, bottom and crossbar of the elevator in stainless steel (1430 mm/56.3 inches)
Change the chain, bottom and crossbar of the elevator in stainless steel (1600mm/63 inche-1800 mm/70.86inches)
Pneumatic suspension on front axle (25 Km/h only, 15.5 miles/h only)
Hydraulic suspension on front axle (25 Km/h only 15.5 miles/h only)
RADIO-CD bluetooth (phone)
Hydraulic suspension on front axle
Tub bottom made on stainless steel MTS-13-H
Tub bottom made on stainless steel MTS-16-H
Tub bottom made on stainless steel MTS-20-H
Tub bottom made on stainless steel MTS-25-H
HARDOX tub bottom MTS-13-H
HARDOX tub bottom MTS-16-H
HARDOX tub bottom MTS-20-H
HARDOX tub bottom MTS-25-H
Two hydraulic motors on the silo cutter
Extreme Temperatures (-20º C/-4°F) starting system, Heating system hydrauli oil and engine.