Horizontal TMR towed Mixer with one auger
• Horizontal single-auger mixing system with screwed-on blades.
• Two beaters system on the opposite wall to the unloading door.
• Motion by means of oil-lubricated chain with epicyclical redactor engine.
• Strong machine, made with high-quality materials, needs minimal maintenance.

STANDARD EQUIPMENT
• Mechanical jack for MT 7, 10 and 13 models.
• Hydraulic jack for MT 16, 20 and 25 models.
• Two flexible controls by cable (beater by manual control)
• Simple ladder
• Programmable weighing system PERIN M-700 (20 rations x 20 ingredients).
• Self-contained, hydraulically independent from the tractor.
• Chute 930 mm/3.05 ft long, made on steel with two cylinders
• Tyres:
MT 7: 12,5/80-15,3
MT13: 13,5/75 430
MT16 y 20: 385 /65 R22,5
MT25: 18 R 22,5

FRONT JACK
Hydraulic jack with manual pump for MT7, MT10 & MT13
Mechanichal Jack
BRAKES
Manual brakes
Hydraulic brakes
Hydraulic and manual brakes
Pneumatic and manual brakes
DESCARGA
Change chute to the other side (without inversor): MT 16-20-25
Change chute to the other side (with inversor): MT 7, 10, 13
Flow regulator of the unloading conveyor
Hydraulic elevation with flexibles (chute length till 63 inches), one cylinder
Hydraulic elevation with flexibles (chute length more than 63 inches), two cylinder
Hydraulic elevation with electrovalves(chute length till 63 inches), one cylinder
Hydraulic elevation with electrovalves (chute length more than 63 inches), two cylinders
Extended chute in 11.81 inches (total length 48.43 inches)
Extended chute in 19.69 inches (total length 56.3 inches)
Extended chute till 62.99 inches OR 70.87 inches (total length)
Chain, bars and bottom of the conveyor in inox steel (36.61 inches)
Chain, bars and bottom of the conveyor in inox steel (48.43 inches)
Chain, bars and bottom of the conveyor in inox steel (56.3 inches)
Chain, bars and bottom of the conveyor in inox steel (62.99 inches and 70.87 inches)
Add second door in contrary side (double discharge) WITH CONVEYOR
Add second door in contrary side (double discharge) WITHOUT CONVEYOR
No conveyor in discharge, DISCOUNT
TYRES
Change tyres for MT10 to mod. 15R22.5 INCREASE PER MACHINE
Change tyres for MT13 to mod. 15R22.5 INCREASE PER MACHINE
Change tyres for MT16-20 to mod. 445/65 INCREASE PER MACHINE
Change tyres for MT16-20 to mod. 425/65 INCREASE PER MACHINE
SUSPENSION
Special chassis with springs for MT 13
Special chassis with springs for MT 16-20-25
TUB
Inner coatig with inox steel for MT-7
Inner coatig with inox steel for MT-10
Inner coatig with inox steel for MT-13
Inner coatig with inox steel for MT-16
Inner coatig with inox steel for MT-20
Inner coatig with inox steel for MT-25
Big bales kit with inversor for MT7, MT10 y MT13 (new machine)
Big bales kit with inversor for MT16 and MT20 (new machines)
Big bales kit for MT25 (new machine)
CONTROLS
Change flexibles by electrovalves 2+1
Change flexibles by electrovalves 3+1
Change flexibles by electrovalves 4+1
Change flexibles by electrovalves 5+1
Change flexibles by electrovalves in block for silage cutter 6 positions
Radio controls (wireless) 2 positions
Radio controls (wireless) 3 positions
Radio controls (wireless) 4 positions
Radio controls (wireless) 5 positions
Radio controls (wireless) 6 positions
ACCESSORIES
Battery kit
Lights
Homokinetic one knot PTO Shaft
Homokinetic double knot PTO Shaft
Double entrance inversor for MT 7, 10 and 13
Magnets 29.5"x 8.66"
Mudguards
German type hitch
Change the axle from curved to straight
Add a 3rd beater
Rear loader with hydraulic elevation (big size)
Work lamp