Vertical TMR Self-proppelled, with one auger and side discharge, motor in the rear.

TUB CAPACITY/ 12 m3/424 c.f. | 14 m3/494 c.f. | 16 m3/565 c.f.
Mixing system with a single heavy duty vertical auger and interchangeable resistant knifes. Driven by a variable flow pump and piston engine. Adjustable mixing speed.
90 hp, adjustable speed motor. Width 2000 mm/78.74 inches. Manually driven lowering adjustment in the control panel, lowering cut-out by pressure switch depending on the working pressure of the cutter. Driven by a variable flow pump and orbital motors.
LOADING BELT/ Polyethylene chain and cross pieces.
UNLOADING BELTS/ By flat side door with discharge tray.
WEIGHSCALE/ Programmable 20 recipes x 20 Ingredients.
ENGINE/ Diesel, FPR (IVECO), 129 kW, 2200 rpm, rear.
FUEL TANK/ 160 litres/42.3 Gal.
TRANSMISSION/ Hydrostatic closed circuit. Driven by a variable flow pump and piston motor.
AXLES/ Two, front drive and steering. Four wheels 445/45R19.5
SUSPENSION/ Front and rear leaf springs
STEERING/ Hydraulic servo. Maximum turning angle of 40°
BRAKES/ Service, parking and emergency on rear axle. With the 40 km/h option (25 miles/h), service brake also on rear axle.
Circuits designed to work in harsh environmental conditions. Compliant with European machines safety and electromagnetic incompatibility regulations. Located behind the cab.
One-seat. Manufactured in steel with anti-corrosion chemical treatment. Optimal visibility of the environment (inward sloping windshield). Swing door. Safety glass.
Multifunction joystick, buttons and indicators (reducer oil temperature, hydraulic oil temperature, mixer pressure, cutter pressure, hydraulic oil level, breakdown lights ...).
Two spotlights front and two rear, air suspension seat, fire extinguisher, water heating, radio CD.
Movement speed 0-15 km/h (25 km/h and 40 km/h option) 0-9.3 miles/h (15.5 miles/h and 25 miles/h optional).


Magnet fixed on unloading belt (125 m3/h, 73.5 c.f./min)
Air conditioning
Air conditioning+ climatizer
Electric heater on rearview mirrors
Rearview mirrors electrically adjusted + electric heater
Sliding left rearview mirror
Working headlight
Led technology headlight
Silo cutter support
Silo cutter suspension by nytrogen accumulator
Silo cutter made on stainless steel
Double TV camera TFT colour 7”
Reversible fan 175 CV CLEAN FIX
Reversible fan 238 CV CLEAN FIX
Centralized greasing automatically
Centralized greasing
Sliding conveyor under the tub (200 mm/7.84 inches)
Differential locking (only 4x4)
Increase motor power from 175 to 238 CV IVECO
Laoding belt made on rubber
4 wheels drive (4WD) 4 wheels 445/45-19,5
4 steering wheels (4SW) 4 wheels 445/45-19,5
4 stering wheels and 4 steering wheels (4WD x 4SD) 4 wheels 445/45-19,5
2 Hydraulic restrictor knives
Extra door on flat side
Door on curved area with chain conveyor made on steel
Door on curved area with chain conveyor made on stainless steel /PVC
Two hydraulic motors on the silo cutter (180 HP)
Mixing auger made on stainless steel AISI 304
Inner tub covering in stainless steel AISI 304 (1500 mm/59 inches high)
Extreme Temperatures (-20º C/-4°F) starting system, Heating system hydraulic oil and engine.